F34 Fork to Fork System M6 - M22

£66.60
ex vat
Share this product

Description

A fully machined tie rod fork or clevis, with sleek geometry and a wide range of adjustment, developed to meet the requirements of modern Architectural design.

System lengths up to 6 metres are available, rod connectors can be used to achieve longer spans.
Please get in touch for lengths over 3 metres.


Your system length is measured in metres from pin centre to pin centre. 

The table below gives technical data to help select the rod diameter and fork dimensions for your fixing points.
All measurements are in mm.


 

Thread
M6
M8
M10
M12
M16
M20
M22
M24
M27
M30
M36
Yield Load KN
8.9 16.4 26.1 38.1 72.1 103.6 129.5 149.2 196.4 238.7 349.2
Breaking Load KN
12.5 23.0 36.6
53.4 100.9 144.0 180.1 207.5 273.3 332.1 485.8
+/- Adjustment
28 36 43 43 53 58 60 66 78 98 98
A 59 78 104 115 140 166 184 207 228 264 279
B 10 14 22 27 30 40 45 50 50 60 60
C 8.5 10.3 16 19 23 26 32 35 41 44 50
D 6.4 8 11 12.7 16 19 22 25 28 31 35
P 6.3 8 11 12.7 16 19 22 25 28 30 34
 

Finish Options

Fork ends and conical nuts are available with
satin (240 grit) finish as standard.
Highly polished finish is optional.


240 Grit

Polish

Adjustment

Tie rods and fittings are threaded left hand one end and right hand the other. +/- adjustment is achieved by rotation of the rod in a clockwise/counter clockwise direction.

Locking

Conical locking nuts have been designed to cover Tie bar threads at mid adjustment. Providing a clean line between the rod and end fitting.

Pins

Double headed pins including pin head and locking screw are supplied as standard.

Isolating between different materials, can be achieved by using isolation washers and sleeves.

Ready to Install

Tie Rod systems are supplied ready to install. Fork ends are pre-assembled and adjusted to customer's pin/pin requirements.

Important note about delivery and shipping cost
Please be aware that our lead time can be up to 4 weeks.
Shipping cost may increase depending on your location and total weight of your order. You will be contacted by our sales representative if there are any changes to your shipping cost. This applies to products: F34, F33, RTP System.
You may wish to contact our sales team before confirming your order.


See our Tie Rod/ Tie Bar System installed at the Birmingham Bullring

Click here for more information about our Tie Rods/ Tie Bar Systems

Loading...